Fiberglass Shower Resurfacing - Omaha, NE

Fiberglass shower resurfacing is an affordable way to give your shower the look and feel of a brand-new shower without replacing the whole thing. Renew Resurfacing has been resurfacing showers throughout Omaha for many years. We have professional experience to resurface all styles, ages, and colors or fiberglass showers. If you are thinking about getting a new shower installed, turn to Renew Resurfacing as we can restore your existing shower making it look brand new.
​
Over years of cleaning shower and sitting water at the base of your shower, the original finish worn away and the shower has become porous. All the dirt, grime, and hard water stains get trapped inside all of the pores of your shower resulting in the use of harsh bathroom cleaners that remove the finish of your shower and cause it to wear down faster. Fiberglass shower resurfacing is more affordable than replacing the shower. Renewing or resurfacing a shower is applying a new finish coat to the shower as a liquid so the tub is non-porous when finished. The result is giving your shower a better look, longer lasting shower that is easier to clean. With Renew Resurfacing, each fiberglass shower resurfacing job is unique, customizable and refinished to last for years. ​

ADVANTAGES OF RENEW RESURFACING'S FIBERGLASS SHOWER RESURFACING

  • The highest abrasion resistance available in the industry. (Holds up to normal wear and tear)
  • Extremely impact resistance (Won't crack or chip if you drop a shampoo bottle)
  • Resistance to extreme temperatures
  • Color retention (won't yellow like epoxy coatings)

Our top of the line finish has been modified for use in the resurfacing industry. Other companies may use inferior products to cut costs and in turn deliver and shorter lasting product. But at Renew Resurfacing we use the best products to renew showers to look as if they were just installed. We work diligently to complete our products right the first time to make our resurfacing projects last as long as possible while making our rates as affordable as possible.

What if my Fiberglass Shower has a crack, chip or hole in it?


Older, worn down fiberglass shower get cracks and holes in them as they break down. The professionals at Renew Resurfacing can fill in any significant cracks, chips, or holes in the shower base. Before doing any repair work, it needs to be determined if the cracks have been caused by lack of support underneath the shower base. If this is the case, we place an inlay available to give extra support then repair the cracks or holes. You can generally tell if a fiberglass shower needs more support by determining if there is any “give” when you apply pressure around the area of the crack. Chips, cracks, and holes that are on the sides or are not a result of lack of support can be fixed as a part of our normal resurfacing process.
​
You can find out more about chips, cracks, and holes in our Chip, Crack & Scratch Repair.

Fiberglass Tub Resurfacing with Renew Resurfacing

Shower refinishing, shower resurfacing, shower reglazing, and shower painting are all terms to describe the applying of a durable new finish coat to an existing fiberglass shower.
Renew's process for resurfacing/recoloring of fiberglass or acrylic showers is a very cost effective alternative to replacement. The National Remodelers Association estimates that the average cost of replacing a shower is $1,500 - $5,000. In addition, in most cases the new shower does not have the same quality as the original.

Why RENEW RESURFACING?

  • 70-80% savings over replacing an old tub.
  • Use of your tub the very next day.
  • You know that you will receive the highest quality products and service. 
  • 5 year limited warranty.

HOW DO I CARE FOR MY NEW FIBERGLASS TUB?

You should not use abrasive cleaners like Comet or Ajax, even Soft Scrub has some mild abrasives in it. However, you won't need to use abrasive cleaners since the new finish will be non-porous and the dirt and grime should wipe away much easier than before.
For regular cleaning, you should use cleaner that is “safe for acrylics”. There are many available such as Tilex and an Arm and Hammer product called “Scrub Free”. You also want to make sure that your shower dries out completely after each use. The reason for this is that water will deteriorate anything over time - even a new shower.
You should repair leaky faucets immediately and keep shampoo bottles etc. off the edge of the shower. You should also not use a rubber mat. If you pick up a rubber mat from the bottom of a bathtub or shower 3 days after you have used the tub, you will find that the bottom of the tub is still wet. In addition, the rubber suction cups will be constantly pulling at the new finish.
If you are going to use a bath mat, you should purchase a vinyl mat and remove the mat from the shower after each use.

Call Us Today To Set Up Your Free Consultation!

Contact us today to discuss what your option may be and how we can help.

Hours

M-F: 8am - 5pm
Saturday: 9am - 3pm

Email

candy@renewresurfacing.com

Address
Renew Resurfacing
(Shipping Only - Not A Showroom)
20515 Nicholas Cr. #7
​Elkhorn, NE 68022

    Send Us A Message